There are several types of keying we can do for commercial buildings. Here are the four types we provide. The first one is the most common:
How many existing locks cylinder in total do you have on your building that you want rekeyed? A lock cylinder is everywhere a key can go.
How many do you have a working key for? And how many do you not have a working key for? A standard rekey is for a deadbolt, door knob or lever. Non standard is mortise, patio door, exit device or other lock type.
Please enter the quantity for each type of lock rekey.
If your lock set is worn out, broken, or you want a new one; How many new Lever Sets and/or deadbolts would you like?
If we are replacing old hardware this include non door modification installation. If there is no existing hole prep on the door and frame, this needs to be done in order to install.
Please enter the quantity of new hardware you would like. . If door needs to be prepped please add quantity of door prep required for each new unit.
If your lock set is worn out, broken, or you want a new one; How many new Mortise Lock Sets, Exist Devices and/or Door Closures would you like?
Please enter the quantity of new hardware and color you would like. If door needs to be prepped please add quantity of door prep required for each new unit.
This includes Sargent grade 1 heavy duty commercial mortise lock set with non door modification installation.
If you added new hardware in the previous section please add the total quantity needed to be keyed to match.
Discount does not apply to purchase of cylinders, only full hardware sets.
Discount does not apply to purchase of cylinders. Only full hardware sets.
It comes with two keys. How many additional keys would you like? Please enter the quantity of each below.
Please select the type of service call you would like. The most common is the scheduled two hour time slot. A service call selection is required to come out on site.
The actual service call billed will be based upon the exact address and range traveled. Our standard service zone goes up to beltline, to Baily Hill rd, to 52nd and I-5 for Eugene. For Springfield it is hwy 105 up until 52nd and main st.
For additional cities here is the basic mileage to that area:
- Creswell - 7 miles
- Cottage Grove - 15 miles
- Veneta - 10 miles
- Coburg - 3 miles
- Junction City - 10 miles
- Harrisburg - 15 miles
- Brownsville - 25 miles
- Corvallis - 50 Miles
- Florence - 55 miles
- Roseberg - 60 miles
We do travel everywhere in between and farther. If you are out of Eugene/Springfield area please add the additional estimate mileage to make your quote more accurate.
A two hour time slot when we have availability, with a 15 minute lead time call during your time slot.
Immediate assistance during the day or would like to cut in line. Average lead time is 15-20 minutes for a technician to arrive.
An after hours emergency call is when we are done working for the day or weekend. This is usually during the night. Average lead time of technician onsite is 15 - 20 minutes.
Outside of our standard service area.